Screw Jack Apparatus (SMT-TM-29)

availability: in stock

Approximately Ø200mm turntable.
20mm outside diameter thread.
2.5mm thread pitch.
The effort can be applied to raise or lower the load.
Set of weights.
Comprehensive instruction manual provided.
Technical specification

- +


Screw Jack SMT-TM-29 is based around a bench-mounted base incorporating a turntable
fitted with a metric square pitch screw jack thread. The apparatus is stood on a firm bench
and a cord is wound around the periphery of the turntable. The free end of the cord is
threaded over a pulley and then hangs vertically to accept the load hanger supplied. A set
of calibrated weights is supplied which are suspended from the load hanger thus producing
a known torque on the system. To adjust the experimental parameters further the
calibrated weights can also be applied to the top surface of the turntable. A comprehensive
instruction manual for lecturer and student, giving full details on apparatus assembly and
operation as well as example results. All necessary assembly and operational tools are